Skip to product information
60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV
  • 60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV
60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV

60kV max. High Voltage Power Supply for DIY Electrospinning - MSK-ESPS-60KV

SKU: 60kv-max-high-voltage-power-supply-for-diy-electrospinning-msk-esps-60kv

Price: RFQ

Specifications

 MSK-ESPS-60-24V is an AC input DC output high voltage power supply designed for the DIY Electrospinning device. High voltage power in the system must have Grounding tests (GFCI) before first-time use. Improper grounding may cause charge build-up and damage the unit. SPECIFICATIONS Features Digital Voltmeter and Current display Output voltage and current can be set by using knobs on the front panel and read from the digital display Constant current/Constant Voltage mode of operation Built-in Arc Protection Circui t Input Power 208 - 240V AC (50/60Hz) 150W Max power consumption You may order a 200W transformer to run it at 110VAC Power Inlet and Outlet Cable are included Output Power DC 0 - 60 kV Single Output, 2.5 mA max Current Dimensions 214mmL×285mmW×67mmH Operational Environment Temperature:    0 - 50 °C Humidity:         10 - 80% RH Compliance NRTL certification is available upon request at the extra cost Warranty One-year limited warranty with lifetime support Options You may need Syringe Pump to deliver liquid, Please click the Pic. 1 below to order. You may need a drum collector to make coating ( Please click Pic. 2 to order) You may order X-Y stage for flat coating, please click Pic. 3 right to order Please put the device into a fume hood for safety and health  ( Pic. 4) DIY an Ultrasonic Spray and Electrospinning device Pic. 1 Pic. 2 Pic. 3 Pic. 4 Operation Instructions



Features
  • Digital Voltmeter and Current display
  • Output voltage and current can be set by using knobs on the front panel and read from the digital display
  • Constant current/Constant Voltage mode of operation
  • Built-in Arc Protection Circuit
    Input Power
   
  • 208 - 240V AC (50/60Hz) 
  • 150W Max power consumption
  • You may order a 200W transformer to run it at 110VAC
  • Power Inlet and Outlet Cable are included
Output Power
 DC 0 - 60 kV Single Output, 2.5 mA max Current
Dimensions

 214mmL×285mmW×67mmH
Operational Environment Temperature:    0 - 50 °C
Humidity:         10 - 80% RH
Compliance NRTL certification is available upon request at the extra cost
Warranty One-year limited warranty with lifetime support
Options
  • You may need Syringe Pump to deliver liquid, Please click the Pic. 1 below to order.
  • You may need a drum collector to make coating ( Please click Pic. 2 to order) 
  • You may order X-Y stage for flat coating, please click Pic. 3 right to order
  • Please put the device into a fume hood for safety and health  ( Pic. 4)
  • DIY an Ultrasonic Spray and Electrospinning device
  •        Pic. 1     Pic. 2   Pic. 3   Pic. 4
Operation Instructions

You might also like...