Skip to product information
Zirconia Jar w/ SS Jacket for SFM-3 & SFM-3-II Milling Machines (80ml) - MJ3YSZ80
  • Zirconia Jar w/ SS Jacket for SFM-3 & SFM-3-II Milling Machines (80ml) - MJ3YSZ80
  • Zirconia Jar w/ SS Jacket for SFM-3 & SFM-3-II Milling Machines (80ml) - MJ3YSZ80
Zirconia Jar w/ SS Jacket for SFM-3 & SFM-3-II Milling Machines (80ml) - MJ3YSZ80

Zirconia Jar w/ SS Jacket for SFM-3 & SFM-3-II Milling Machines (80ml) - MJ3YSZ80

SKU: mj3ysz80

Price: RFQ

Specifications

 Zirconia Jar can be used for the MSK-SFM-3 , MSK-SFM-3-F , and MSK-SFM-3-II for milling materials to avoid iron or other inorganic contamination in air-tight condition. SPECIFICATIONS Material Zirconia (Purity: >99.99%) Hardness:  > 8.5 Mohs Density:    ~ 5.9 g/cm3 Capacity 84ml (actual cubage) Package 1 pc of Zirconia jar with SS Jacket (two O-rings are included to seal the zirconia jar) Please click the picture left to order Zirconia balls Ball Miler Compatibility Zirconia Jar be used on the MSK-SFM-3 MSK-SFM-3-F MSK-SFM-3-II MSK-SFM-1S MSK-SFM-GB Weight 1.6 lbs Dimension Application Notes Warning:  Mill an empty the zirconia jar and ball, may cause Zirconia powder to chip out.  Please see the picture below test, whatever where the jar is made. To avoid contamination from the wall and ball, please fill the sample into the jar with 1/3 volume first before milling.  You may start at a slow speed and let powder coat to the surface of the wall and ball, then go a higher speed. For air-sensitive material, you may fill the sample and balls with an inert gas glovebox, then ball milling outside

Material
  • Zirconia (Purity: >99.99%)
  • Hardness:  > 8.5 Mohs
  • Density:    ~ 5.9 g/cm3
Capacity
  • 84ml (actual cubage)

Package
  • 1 pc of Zirconia jar with SS Jacket (two O-rings are included to seal the zirconia jar)
  • Please click the picture left to order Zirconia balls



Ball Miler Compatibility

Zirconia Jar be used on the 
Weight
  • 1.6 lbs
Dimension
Application Notes
  • Warning:  Mill an empty the zirconia jar and ball, may cause Zirconia powder to chip out.  Please see the picture below test, whatever where the jar is made.
  • To avoid contamination from the wall and ball, please fill the sample into the jar with 1/3 volume first before milling.  You may start at a slow speed and let powder coat to the surface of the wall and ball, then go a higher speed.
  • For air-sensitive material, you may fill the sample and balls with an inert gas glovebox, then ball milling outside

You might also like...