{"product_id":"fmf-300","title":"Levitation Cold Crucible Vacuum Melting Furnace ( 300 g Max ) - FMF-300","description":"FMF-300 is an Advanced Vacuum Float-Melting System for exploring new generation magnetic alloy and metallic materials with max. loading 300 g sample. The system uses a 60KW high-frequency induction heater to cause a metallic sample to float during melting by magnetic vortex within a special designed water-cold copper crucible placed inside a vacuum-sealed quartz tube. Therefore, it can produce extra high purity Ferro or magnetic alloy without any contamination. SPECIFICATIONS: Induction Heater Working Voltage: AC 220V (3 phases) 50\/60Hz Working Current: 10-100 Amp Output Frequency: 50-200 kHz non-adjustable Max. Output Power: 60KW Electrically driven crucible holder for easy sample loading Cooling Water Requirement: pressure ≥ 0.3Mpa, water flow rate ≥130 L\/min Max. Load: \u0026lt;300g according to stainless steel density as calculation Copper Crucible Dimensions: Φ45 mm(ID) x 52.5 mm(H) Water cooling inside Required Water Flowrate: ≥40 L\/min Max. Load: \u0026lt; 300g according to stainless steel density as calculation Min. Load 5 g 300 g melting capability is available upon request. The requirement for water and Gas Total water cooling required \u0026gt; 135 L\/min two recirculating water chiller are included water chiller KJ6300, 116L\/ min and KJ5300 , 16L\/min. High purity Argon gas ( \u0026gt; 5N) tank with pressure regulator is required, but not included. Click here to learn more about the installation of a gas regulator. ( please click the picture below right to order a correct gas regulator ) Quartz Tube 80 mm OD x 72mm ID. x 300mm L Vacuum Flange One pair of Vacuum Flanges with double high-temperature silicon O-rings Max. Vacuum Pressure: \u0026lt;5pa (4x10-2 torr) by mechanical pump (included) \u0026lt;5x10-3pa (4x10-6 torr) by t urbopump Top flange is the hinged type for easy sample loading and one vacuum-sealed flip shovel is built-in to melt the sample in multi-times The bottom flange can be controlled automatically for easy sample loading Vacuum Pump One heavy-duty mechanical pump with exhaust filter is included, and place inside the mobile case. KF25 adapter, bellow, and valve are included for immediate use Turbopump is available upon request at extra cost Compliance NRTL or CSA Certification is available upon request at extra cost Application Notes WARNING: The flow rate of gases should be limited to \u0026lt; 200 SCCM (200 ml\/min) The Melting System are designed for using under vacuum and low pressure \u0026lt; 0.02 MPa \/ 0.2 Bar\/ 3 psi. Gas build-up with pressure levels exceeding over 3 PSI may cause irreversible damage to the furnace chamber. A pressure regulator must be installed on your input gas tank The output gas pressure must be set below 3 PSI at all times after opening the gas tank with the gas maintained in a continuous flowing condition. Never heat the furnace while the gas release valve is closed, and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating. Open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages. Attention: Understand the standard procedure for vacuum melting and inert gas melting prior to operation. Read the manual carefully. Monitor and properly control the inside pressure of reaction vessel at all time during operation. Otherwise, failure of operation may result in irreversible damage to the equipment or personal injury For customization inquiries, please complete the \" Customize Induction Heating System Form \" and return it to info@mtixtl.com\u003cbr\u003e\u003cbr\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInduction Heater\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/HF-40AB.jpg?v=1713214486\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/HF-40AB_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e \u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eWorking Voltage: AC 220V (3 phases) 50\/60Hz \u003c\/li\u003e\n\u003cli\u003eWorking Current: 10-100 Amp\u003c\/li\u003e\n\u003cli\u003eOutput Frequency: 50-200 kHz non-adjustable\u003c\/li\u003e\n\u003cli\u003eMax. Output Power: 60KW\u003c\/li\u003e\n\u003cli\u003eElectrically driven crucible holder for easy sample loading\u003c\/li\u003e\n\u003cli\u003eCooling Water Requirement: pressure ≥ 0.3Mpa, water flow rate ≥130 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. Load: \u0026lt;300g\u003c\/span\u003e according to stainless steel density as calculation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCopper Crucible\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/crucible.3.jpg\" rel=\"lightbox\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/crucible.3_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: Φ45 mm(ID) x 52.5 mm(H)\u003c\/li\u003e\n\u003cli\u003eWater cooling inside\u003c\/li\u003e\n\u003cli\u003eRequired Water Flowrate: ≥40 L\/min\u003c\/li\u003e\n\u003cli\u003eMax. Load: \u0026lt; 300g according to stainless steel density as calculation\u003c\/li\u003e\n\u003cli\u003eMin. Load 5 g\u003c\/li\u003e\n\u003cli\u003e300 g melting capability is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cbr\u003eThe requirement for water and Gas\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTotal water cooling required \u0026gt; 135 L\/min\u003c\/li\u003e\n\u003cli\u003etwo recirculating water chiller are included \u003ca href=\"kj6300\" rel=\"noopener\" target=\"_blank\"\u003ewater chiller KJ6300, 116L\/\u003c\/a\u003emin and \u003ca href=\"kj5300\" rel=\"noopener\" target=\"_blank\"\u003eKJ5300\u003c\/a\u003e, 16L\/min.\u003c\/li\u003e\n\u003cli\u003eHigh purity Argon gas ( \u0026gt; 5N) tank with pressure regulator is required, but not included. \u003cstrong\u003e\u003ca href=\"cga580\" rel=\"noopener\" target=\"_blank\"\u003eClick here to learn more about the installation of a gas regulator.\u003c\/a\u003e ( please click the picture below right to order a correct gas regulator )\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"KJ6300\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/KJ6300.1_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/a\u003e      \u003ca href=\"http:\/\/www.mtixtl.com\/twostagebrass0-100psianalyticalcylinderregulatorcga-580withneedlevalve-fa-y12244d580.aspx\"\u003e\u003c\/a\u003e\u003ca href=\"cga580\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/EQGRCGA580_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuartz Tube\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80 mm OD x 72mm ID. x 300mm L\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum Flange\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eOne pair of Vacuum Flanges with double high-temperature silicon O-rings\u003c\/li\u003e\n\u003cli\u003eMax. Vacuum Pressure:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;5pa (4x10-2 torr) by \u003ca href=\"ytp-550-ld\" rel=\"noopener\" target=\"_blank\"\u003emechanical pump\u003c\/a\u003e (included)\u003c\/li\u003e\n\u003cli\u003e\u0026lt;5x10-3pa (4x10-6 torr) by \u003ca href=\"http:\/\/mtixtl.com\/rotary-vane--pump.aspx\"\u003et\u003c\/a\u003eurbopump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTop flange is the hinged type for easy sample loading and one vacuum-sealed flip shovel is built-in to melt the sample in multi-times\u003c\/li\u003e\n\u003cli\u003eThe bottom flange can be controlled automatically for easy sample loading\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/FMF40stiring.jpg?v=1706114469\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/FMF40stiring_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e       \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/FMF40crucibletube.jpg?v=1706114470\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/FMF40crucibletube_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum Pump\u003cbr\u003e \u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eOne heavy-duty mechanical pump with exhaust filter is included, and place inside the mobile case.\u003c\/li\u003e\n\u003cli\u003eKF25 adapter, bellow, and valve are included for immediate use\u003c\/li\u003e\n\u003cli\u003eTurbopump is available upon request at extra cost\u003c\/li\u003e\n\u003cli\u003e      \u003ca href=\"gzk-103-l-ld\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/GZK103GLLD_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003e NRTL or CSA Certification is available upon request at extra cost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Notes\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eThe flow rate of gases should be limited to \u0026lt; 200 SCCM (200 ml\/min)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eThe Melting System are designed for using under vacuum and low pressure \u0026lt; 0.02 MPa \/ 0.2 Bar\/ 3 psi. Gas build-up with pressure levels exceeding over 3 PSI may cause irreversible damage to the furnace chamber.\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eA pressure regulator must be installed on your input gas tank\u003c\/li\u003e\n\u003cli\u003eThe output gas pressure must be set below 3 PSI at all times after opening the gas tank with the gas maintained in a continuous flowing condition. \u003c\/li\u003e\n\u003cli\u003eNever heat the furnace while the gas release valve is closed, and a positive pressure condition exists within the furnace chamber.\u003c\/li\u003e\n\u003cli\u003eThe pressure gauge must be used to closely monitor the chamber condition at all times during the heating.\u003c\/li\u003e\n\u003cli\u003eOpen the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eAttention: \u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eUnderstand the standard procedure for vacuum melting and inert gas melting prior to operation. Read the manual carefully. Monitor and properly control the inside pressure of reaction vessel at all time during operation. Otherwise, failure of operation may result in irreversible damage to the equipment or personal injury\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFor customization inquiries, please complete the \"\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/MTI_Corp_Induction_Heater_Questionnaire.docx?v=1747349017\" rel=\"noopener\" target=\"_blank\"\u003eCustomize Induction Heating System Form\u003c\/a\u003e\" and return it to info@mtixtl.com\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MTI","offers":[{"title":"Default Title","offer_id":44985170526347,"sku":"EQ-FMF-300","price":0.0,"currency_code":"MYR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/4405\/3643\/files\/indication.1_9557c088-5599-4eae-9c6f-5bdc58106930.png?v=1764854931","url":"https:\/\/mti-indonesia.com\/products\/fmf-300","provider":"MTI Malaysia \u0026 Indonesia","version":"1.0","type":"link"}