{"product_id":"imcs-1700-mas","title":"Compact Induction Atomizer (1 MPa @ 1700C Max.) for 3D Printing - IMCS-1700-MAS","description":"IMCS-1700-MAS is a compact atomizer designed for the preparation of spherical particles in a small batch (200 g Al alloy). The 25 kW induction power supply can melt high-temperature alloy up to 1700°C, including Ni-based superalloy, high-entropy alloy, or even refractory elements. With an atomizing pressure of 1 Mpa, the particle size is usually less than 80 microns. Due to its compact design, the equipment can fit in any lab without the hassle of building rearrangement. SPECIFICATIONS: Power 208 - 240 VAC, 3 Phases, 25 kW, 50\/60 Hz 380, 400, 480 VAC is available upon request Induction Power Supply Max. output power: 25 KW Frequency: 30 - 80 kHz, (non-adjustable) Duty Cycle: 100% Induction Coil: 170mm (ID) x 110 mm (H) Water-cooled Protection: water interlock, over-temperature, and overpower protection Melting Chamber ( Top) Chamber is made of SS304 with a water-cooling jacket to ensure surface temperature \u0026lt; 60ºC. 0.2 MPa max. working pressure with a safety pressure-relief valve Thermocouple fixture with a linear actuator. Observation window with tempered glass Casting Chamber ( Bottom ) The bottom chamber is made of SS304 with a KF 25 vacuum port Vacuum level: 50 mTorr (with mechanical pump) Crucible with a special nozzle One set of high purity graphite crucible and thermocouple sheath is included for max. 200 g capacity ( Fe based alloy) OD 80 mm × ID 60 mm × H 160 mm Max volume: 200 g (refer to iron) A special design of nozzle at the bottom of the crucible to atomize the melt. The crucible is sealed from the casting chamber to keep high pressure at the melting chamber. Powder yield for \u0026lt; = 200 mesh is about 30% - 60% depending on the material's melting point. In order to increase powder yield, strongly suggest ordering a crusher (Pic1) and jet mill (Pic.2) to reduce large particle size and a vibrating sieve (Pic. 3) to screen particles fast. Pls, click the picture below to order. Pic.1 Pic. 2 Pic. 3 Temperature Control Precision temperature controller with 30 segments programmable Automatic PID control with the protection of over-temperature and thermal couple failure. Thermal couple: B type Working temperature range: 500~1600, 1700 Max. (\u0026lt;1hour ). Temperature stability : +\/- 5 Manual temperature control for the fast heating 4\/second(1000-1200) 3\/second(1200~1500) 1~2\/second (1500~1700) Cooling \u0026gt; 116 L\/minute cooling water is required to cool the induction coil. May click the picture below to order a water circulator. Particle Morphology and Distribution Particles shall be sieved after atomizing to get a uniform size and better distribution Particle distribution is strongly dependent on processing parameters Compliance CE certified NRTL or CSA certification is available upon request. Warning This is high-pressure equipment! Must wear goggles when operating. Must use the pressure regulator to limit input gas pressure below 10 bars Application Note MTI provides a full line of research equipment for 3D printing and thermal spraying materials using all quantity samples to save money and space: ( click pictures below to see details) Arc Melting          Atomizing         Hydrogen annealing       Powder surface Coating       HIP Treatment\u003cbr\u003e\u003cbr\u003e\u003ctable style=\"width: 99.9465%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003ePower\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e208 - 240 VAC, 3 Phases, 25 kW, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e380, 400, 480 VAC is available upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eInduction Power Supply\u003cbr\u003e\u003ca href=\"..\/..\/..\/SP-25BD.aspx\"\u003e\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/QQ%E5%9B%BE%E7%89%8720180420153829.jpg\" title=\"\"\u003e\u003c\/a\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"sp-25bd\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/SP-25BD_100x100.jpg?v=1747345907\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003ca href=\"..\/..\/..\/SP-25BD.aspx\"\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. output power: 25 KW \u003c\/li\u003e\n\u003cli\u003eFrequency: 30 - 80 kHz, (non-adjustable)\u003c\/li\u003e\n\u003cli\u003eDuty Cycle: 100%\u003c\/li\u003e\n\u003cli\u003eInduction Coil: 170mm (ID) x 110 mm (H) \u003c\/li\u003e\n\u003cli\u003eWater-cooled\u003c\/li\u003e\n\u003cli\u003eProtection: water interlock, over-temperature, and overpower protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eMelting Chamber ( Top)\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMC5.jpg\" rel=\"lightbox\"\u003e\u003cbr\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eChamber is made of SS304 with a water-cooling jacket to ensure surface temperature \u0026lt; 60ºC.\u003c\/li\u003e\n\u003cli\u003e0.2 MPa max. working pressure with a safety pressure-relief valve\u003c\/li\u003e\n\u003cli\u003eThermocouple fixture with a linear actuator. \u003c\/li\u003e\n\u003cli\u003eObservation window with tempered glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eCasting Chamber ( Bottom )\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"ytp-550-ld\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/PumpFilter.final111.1_new_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe bottom chamber is made of SS304 with a KF 25 vacuum port\u003c\/li\u003e\n\u003cli\u003eVacuum level: 50 mTorr (with mechanical pump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003e Crucible with a special nozzle\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/crucible.1.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/crucible.1_50x50.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e     \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/gas-inlet.png\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/gas-inlet_50x50.png\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e    \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMCS-1700-MAS-High_Temperature_Atomizer.png?v=1747951443\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMCS-1700-MAS-High_Temperature_Atomizer_50x50.png?v=1747951443\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne set of high purity graphite crucible and thermocouple sheath is included for max. 200 g capacity ( Fe based alloy)\u003c\/li\u003e\n\u003cli\u003eOD 80 mm × ID 60 mm × H 160 mm\u003c\/li\u003e\n\u003cli\u003eMax volume: 200 g (refer to iron)\u003c\/li\u003e\n\u003cli\u003eA special design of nozzle at the bottom of the crucible to atomize the melt. \u003c\/li\u003e\n\u003cli\u003eThe crucible is sealed from the casting chamber to keep high pressure at the melting chamber. \u003c\/li\u003e\n\u003cli\u003ePowder yield for \u0026lt; = 200 mesh is about 30% - 60% depending on the material's melting point. In order to increase powder yield, strongly suggest ordering a crusher (Pic1) and jet mill (Pic.2) to reduce large particle size and a vibrating sieve (Pic. 3) to screen particles fast. Pls, click the picture below to order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003ca href=\"msk-fs-152\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/MSKFS-152.1_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePic.1 \u003c\/span\u003e\u003ca href=\"msk-bpm-50\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/MSK-BPM-50-2_Main_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePic. 2 \u003c\/span\u003e\u003ca href=\"msk-syu-3\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/SYU3Main_new_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePic. 3\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eTemperature Control\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMCcontroller.1.png?v=1706241328\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMCcontroller.1_100x100.png\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision temperature controller with 30 segments programmable\u003c\/li\u003e\n\u003cli\u003eAutomatic PID control with the protection of over-temperature and thermal couple failure.\u003c\/li\u003e\n\u003cli\u003eThermal couple: B type\u003c\/li\u003e\n\u003cli\u003eWorking temperature range: 500~1600, 1700 Max. (\u0026lt;1hour ).\u003c\/li\u003e\n\u003cli\u003eTemperature stability : +\/- 5 \u003c\/li\u003e\n\u003cli\u003eManual temperature control for the fast heating\u003c\/li\u003e\n\u003cli\u003e4\/second(1000-1200)\u003c\/li\u003e\n\u003cli\u003e3\/second(1200~1500)\u003c\/li\u003e\n\u003cli\u003e1~2\/second (1500~1700)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eCooling\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"kj6300\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/KJ6200MAIN.2_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026gt; 116 L\/minute cooling water is required to cool the induction coil. \u003c\/li\u003e\n\u003cli\u003eMay click the picture below to order a water circulator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003e\n\u003cp\u003eParticle Morphology\u003cbr\u003eand Distribution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eParticles shall be sieved after atomizing to get a uniform size and better distribution\u003c\/li\u003e\n\u003cli\u003eParticle distribution is strongly dependent on processing parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/50a_c.png?v=1711398755\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/50a_c_100x100.png?v=1711398755\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/500x-2.png\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/500x-2_100x100.png\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e     \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMCS-1700-MAS-Particle_Size_Distribution_Chart_of_Vacuum_Granulation_Furnace.jpg?v=1747952166\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/IMCS-1700-MAS-Particle_Size_Distribution_Chart_of_Vacuum_Granulation_Furnace_100x100.jpg?v=1747952166\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eCompliance\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eNRTL or CSA certification is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eWarning\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis is high-pressure equipment! Must wear goggles when operating.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e Must use the pressure regulator to limit input gas pressure below 10 bars\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31.1674%;\"\u003eApplication Note\u003c\/td\u003e\n\u003ctd style=\"width: 68.6587%;\"\u003eMTI provides a full line of research equipment for 3D printing and thermal spraying materials using all quantity samples to save money and space: ( click pictures below to see details)\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003ca href=\"sp-msm207\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/EQSPMSM207_main2c_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e       \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/2-compressed.jpg\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/2-compressed_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e          \u003c\/span\u003e\u003ca href=\"otf-1200x-s5-h2\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/OTF-1200X-S5-H2-main_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e                         \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003ca href=\"vtc-16-pw\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/VTC-16-PW_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/a\u003e\u003ca href=\"VTC-16-PW\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e                           \u003c\/span\u003e\u003ca href=\"cm-hip-2\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/CMHIPa1.1_100x100.jpg\" style=\"margin-bottom: 16px; float: none;\" title=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n      Arc Melting          Atomizing         Hydrogen annealing       Powder surface Coating       HIP Treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MTI","offers":[{"title":"Default Title","offer_id":44985171574923,"sku":"IMCS1700-MAS","price":0.0,"currency_code":"MYR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/4405\/3643\/files\/IMG_2339-Main2.1_7a3bb545-0242-4897-97ce-167d1da27f2c.jpg?v=1764854943","url":"https:\/\/mti-indonesia.com\/products\/imcs-1700-mas","provider":"MTI Malaysia \u0026 Indonesia","version":"1.0","type":"link"}