{"product_id":"li-cu-li-composite-foil-0-1mm-li-on-two-sides-of-cu-foil-100g-pack-80-mm-w-x-6m-l-eq-lcl-2s-80","title":"Li-Cu-Li Composite Foil (0.1mm Li on Two sides of Cu Foil), 100g\/pack (80 mm W x 6m L) - LCL2S80","description":"Li-Cu-Li Composite foil is made by cold rolling double side Li foil on copper foil under dry room, which is designed to build the anode of pouch cell or cylindrical cell for new generation Li-ion battery. SPECIFICATIONS: Purity 99.9% Lithium, 99.99% Copper Dimension Structure: Li (0.1 mm) + Cu (12um) + Li (0.1 mm) Size: 80mm Width x 6000mm L x 0.21 mm Thickness (Li layer width 80mm; Cu layer width 100mm) Weight:100g\/roll Average Density ~0.94 g\/cm2 Package Packed a steel container filled under dry room (RF \u0026lt; 2%) Use Clean the surface of the lithium foil using a nylon brush\/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox) Shipping Limitations Shipments of lithium foil are described as “UN 1415, Lithium, 4.3, PG I\" All shipments are Hazard Class 4.3 and require “Dangerous when wet” labels Sea Class 4.3 (IMDG) Road, Rail Class 4.3 11a (RID\/ADR) Safety Data Sheet Operation Package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM. Never use N2 gases in glovebox!!! Notes MTI only sells the Li foil within the USA and does not accept international orders due to restrictions on hazard material exportation!!! Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully . Lithium foil may be oxidized during handling and storage. if you find any oxidation on the surface of the Li-chip, please use sandpaper to remove it before using it. Li foil may have a passivation layer, from our customer experience, removing the passivation layer will increase your battery capacity If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene The lithium foil was packed in the dry room with \u0026lt; 10 PPM H2O. Therefore, a slight increase of O2 PPM level might be seen in the glove box when the can is opened. Please keep purging the glove box with ultra-high purity Ar until the required O2 PPM level is reached. No return or refund for misusing or wrong storage which causes lithium foil oxidation. Q \u0026amp;A Why Can not sell in a small package? A: Small package will cost more from a manufacturer Why Li-Chip so expensive? A: Because of shipping regulations from packing to shipping will cost 90% or more. Lithium Storage Options 53L Vacuum Chamber SVC-6050 Glovebox\u003cbr\u003e\u003cbr\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePurity\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e99.9% Lithium, 99.99% Copper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eStructure: Li (0.1 mm) + Cu (12um) + Li (0.1 mm)\u003c\/li\u003e\n\u003cli\u003eSize: 80mm Width x 6000mm L x 0.21 mm Thickness (Li layer width 80mm; Cu layer width 100mm)\u003c\/li\u003e\n\u003cli\u003eWeight:100g\/roll \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAverage Density\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e ~0.94 g\/cm2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePacked a steel container filled under dry room (RF \u0026lt; 2%)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/EQLibLiC45_main1.1.jpg\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" height=\"58\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/EQLibLiC45_main1.1_100x100.jpg\" width=\"87\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/hazardous-chemicals-3.gif\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" height=\"66\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/hazardous-chemicals-3_100x100.gif\" width=\"92\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface of the lithium foil using a nylon brush\/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Limitations\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eShipments of lithium foil are described as “UN 1415, Lithium, 4.3, PG I\"\u003cbr\u003eAll shipments are Hazard Class 4.3 and require “Dangerous when wet” labels\u003cbr\u003eSea Class 4.3 (IMDG)\u003cbr\u003eRoad, Rail Class 4.3 11a (RID\/ADR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Data Sheet\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/Lithium_SDS.pdf?v=1737419859\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" height=\"22\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/1-Operational_Manual-MSDS.jpg\" width=\"159\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.mtixtl.com\/sds\/Lithium_SDS_2022.pdf\"\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003ePackage must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM. Never use N2 gases in glovebox!!!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMTI only sells the Li foil within the USA and does not accept international orders\u003c\/span\u003e due to restrictions on hazard material exportation!!!\u003c\/li\u003e\n\u003cli\u003eOperation and Storage: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eLithium is very active in the air, please carefully read the SDS carefully\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003eLithium foil \u003cspan style=\"color: rgb(255, 42, 0);\"\u003emay be oxidized during handling and storage. if you find any oxidation on the surface of the Li-chip, please use sandpaper to remove it before using it.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLi foil may have a passivation layer, from our customer experience, removing the passivation layer will increase your battery capacity\u003c\/li\u003e\n\u003cli\u003eIf the Li metal is stored in mineral oil, please refer to this guide on \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/Clean_Mineral_Oil_off_Lithium_Metal.pdf?v=1714530430\" rel=\"noopener\" target=\"_blank\"\u003eHow to clean mineral oil off Lithium metal using anhydrous Toluene\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe lithium foil was packed in the dry room with \u0026lt; 10 PPM H2O. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eTherefore, a slight increase of O2 PPM level might be seen in the glove box when the can is opened. Please keep purging the glove box with ultra-high purity Ar until the required O2 PPM level is reached.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNo return or refund for misusing or wrong storage \u003c\/span\u003ewhich causes lithium foil oxidation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e Q \u0026amp;A\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eWhy Can not sell in a small package? A: Small package will cost more from a manufacturer\u003c\/li\u003e\n\u003cli\u003eWhy Li-Chip so expensive? A: Because of shipping regulations from packing to shipping will cost 90% or more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e, \u003ctable border=\"1\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"SVC6050\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/Vacuumstorage2_100x100.jpg\" title=\"\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"SVC6050\" rel=\"noopener\" target=\"_blank\"\u003e53L Vacuum Chamber SVC-6050\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/glovebox\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/EQVGB6OPLD_100x100.jpg\" title=\"\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/glovebox\" rel=\"noopener\" target=\"_blank\"\u003eGlovebox\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MTI","offers":[{"title":"Default Title","offer_id":44984830328971,"sku":"LCL2S80","price":0.0,"currency_code":"MYR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/4405\/3643\/files\/LiCuLi_9acb8c7f-4198-4644-a27e-52079afad1ec.jpg?v=1764851027","url":"https:\/\/mti-indonesia.com\/products\/li-cu-li-composite-foil-0-1mm-li-on-two-sides-of-cu-foil-100g-pack-80-mm-w-x-6m-l-eq-lcl-2s-80","provider":"MTI Malaysia \u0026 Indonesia","version":"1.0","type":"link"}