Description
This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide (NCM111) on a single side and is used as the cathode of Li-Ion battery -- 5 sheets /bag
SPECIFICATIONS
- Material: LiNiCoMnO2 （1:1:1)
- Current collector (substrate): Aluminum foil (15 microns)
- Cathode material: Lithium Nickel Manganese Cobalt Oxide
- Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side .
- Single sides material density: 13 ± 0.2 mg/cm2
- Compaction Density: 3.0 ± 0.1 g/cm3
- Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively)
- Specific Capacity: 150 mAh/g [0.1C, 4.25-2.8 V vs Li/Li+, Half Cell] [ Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC ]
Note: The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation for NCM for Aluminum