Compact Pouch Cell Case Forming Machine for Aluminum-Laminated Films w/ Optional Die - MSK-PN120

• Pure pneumatic press with adjustable press speed and pressure.

• 4 sets of dies with various heights are included; there are 6 of them in each set.
• Dimension 3mm depth die: 20mm Dia. x 18mm (H)
• Dimension 4mm depth die: 20mm Dia. x 17mm (H)
• Dimension 5mm depth die: 20mm Dia. x 16mm (H)
• Dimension 6mm depth die: 20mm Dia. x 15mm (H)

• Customized die: $3675/set, delivery time 6-8 weeks.
  
• Max die size: 40 x 35 mm (dual holes, fold, airbag)
• Max die size: 61 x 47 mm (single hole, fold, airbag)
• Max die size: 80 x 35 mm (single hole, four-side sealing, airbag)
• Max die size: 80 x 65 mm (single hole, four-side sealing, no airbag)

Air Pressure Requirement

 pic1 pic2

• 0.8 - 1 MPa Air or inert gas
• For use inside the glove box, please use inert gas
• Air Compressor is not included. please click here to order
• Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation.  Click here to learn the installation of a gas regulator.

• L: 160 mm, W: 125 mm, Depth < 6.0 mm (accurracy: ±0.05mm)

• 1 metric ton

• The thickness of  Aluminum Laminated Films: 0.10 - 0.20 mm acceptable
• Please click the picture to the left to order  Aluminum Laminated Films.

• The tolerance of precision die is very little; Misalignment will result in die damage. Following operation manual when installing the die. MTI is not responsible for the damage caused by desperation.