Semi-Automatic Winder for Large Prismatic Cells - MSK-112A-RS250

MSK-112A-RS250 is a semi-automatic winder for large prismatic cells. Manually feed the positive and negative electrodes into the winding slots, then roll up with the separator films (sandwiched between the cathode and anode materials) into a cell core at constant tension force. This is an ideal tool that provides the reliability and precision to produce high-quality windings of electrode cores.

Features	Easy touchscreen control Positioning of electrode slot with adjustable position and width Adjustable tension, winding speed, and winding cycles High winding alignment accuracy Manual loading and unloading of electrode sheets, automatic winding Settable separator tension control Small footprint for laboratory use
Input Power	AC220±5% V, 50Hz, single-phase, 3 kW power
Winding Needle Width	100 - 190 mm
Separator Width	100250mm
Cathode / Anode Feeding	Width: 98247mm Length: 3003000mm
Width of Strapping Tape	1020mm
Working Environment	No corrosive gases, liquids, or explosive gases near the equipment
Winding Accuracy	Alignment accuracy between the separator and negative electrodes: ≤ ± 0.7 mm Alignment accuracy between the positive and negative electrodes: ≤ ± 0.7 mm
Compressed Air	Compressed air of 57kgf/cm²100L/min is needed for the operation of this machine. Please note the air compressor is not included. Please click the picture on the left to order one at MTI, or order it from your local hardware store. Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
Optional	MTI provides complete sets of equipment for the research of rechargeable battery materials. Please refer to http://www.mtixtl.com/batterycapacitorequipment.aspx Consumables can be ordered at MTI at an extra cost
Size	2400mm L × 1700mm D ×1700mm H
Net Weight	600 kg
Warranty	One-year limited warranty with lifetime support Rusting or damage due to improper storage conditions or maintenance is not covered by warranty
Compliance	CE Certified NRTL or CSA Certification is available upon request at extra cost
Application Notes	Place the machine on a flat surface free of vibration to avoid tipping the equipment Do not change the factory settings of air cylinders without consulting MTI. Beware not to change the air cylinder settings by accident. Take extra caution when operating the cutter and motor to avoid possible physical injury! Do not touch the cutter with your hand! Do not put a hand close to the cutter while the equipment is operating! Do not let hands, hair, or clothes get caught in the rolling-clamping-winding assembly! Put up warning signs and warn other people to stay clear of the equipment.