40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

RM0.00 MYR

40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

Name: 40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE
Brand: MTI
SKU: YLJ40TA-PE
Availability: OutOfStock

SKU: ylj-40ta-pe

Price: RFQ

Description

YLJ-40TA-PE is an electric lab press up to 40 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers to can use the press inside the glovebox.

SPECIFICATIONS

Motorized Hydraulic Pump

Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
Output Power: 150W
180 W AC motor
Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
One pump speed controller is built in to adjust the pump speed
KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
RS485 port is built-in on the control panel for PC operation.
PC software based on Labview is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and suggest you buy a laptop from us for pre-test )

Max. Pressure

40 Metric Ton for pressing machine
65 MPa for the electric pump
The transparent protection cover is built in the front of the pressing machine

Pressure Accuracy

±0.5MPa in high pumping speed ±0.1 MPa in low pumping speed

Hydraulic Oil

ISO46, 1.5 L

Hydraulic Hose

ZG3/8, 1 meter long

Optional KF-40 feedthrough

3 meters long hydraulic hose with a KF40 feedthrough flange is optional which allows the machine to work inside the glove box.

Hydraulic Cylinder Travel Distance

0 - 12 mm

Working Space

150mm x 150mm x 150mm

Gauge Pressure Value to Force Conversion

Pressure Display on the gauge (MPa)	6	13	19	26	32	39	46	53
Force on Hydraulic Cylinder (T)	5	10	15	20	25	30	35	40

P = T x g x 10/ (πr^2)

P: pressure (Mpa) applied to your working piece
T: force (metric ton) applied to the pressure vessel cylinder
g: standard gravity. g ≈ 9.8 m/s2
π: ~3.14
r: radius (cm) of the pressure vessel (1.5 cm)
*1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2

Operation Temperature

10 - 40°C

Overall Dimension

Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)

Pressing Die (Optional)

Pressing dies with various diameters are available upon request at an extra cost

Compliance

CE Certified

Application Notes

The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mold via ethanol after the completion of each experiment
Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
The press can be put in a glovebox