Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000

Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000

RM0.00 MYR
RM0.00 MYR
Skip to product information
Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000
  • Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000
  • Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000
Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000

Hi-Pressure Super Alloy Tube: 85ODx50 IDx1000L (mm) w/ Flange, 1100°C Max. - Tube-HP-85-50-1000

SKU: tube-hp-85-50-1000

Price: RFQ

Description

 Please view " Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 TMat-2014-13-4-Larbalestier-Isotropic round-wire " published by NATURE MATERIAL 3887, 9 MARCH 2014, in which an MTI High-Pressure furnace was used. Ni-based superalloy tube vessel ( 85 OD x 50 ID x 1000 L mm). It can be used under ultra-highly oxidizing and inert gas atmosphere up to 1100°C to process special compounds. It is a consumable part of OTF-1200X-HP-III, which is a compact HIP (hot isostatic pressure) furnace for researching the new generation of materials at a low cost. Specification: Tube Dimensions O.D. 85 mm      I.D. 50mm     Length: 1000mm Inside Diameter: 50 mm Tube Length: 1000 mm Max.Working Temperature without Load: 1100 °C Working Pressure & Temperature: Maximum pressure inside the tube Heating temperature Max. 1958 PSI  (13.5Mpa)    (140 Bar) 800°C Max. 1189 PSI  (8.2 Mpa)    (80 Bar) 900°C Max. 595  PSI  (4.1 Mpa)     (40 Bar) 1000°C Max. 362  PSI  (2.5 Mpa)     (25 Bar) 1100°C (for <1hr) Warning : Please set up a pressure alarm point in the digital pressure display before the operation Must install a pressure regulator on the gas cylinder to increase pressure gradually. Service-life design for 2,000 hours at 800oC. The high-pressure vessel is a consumable part, please order replacement once found deformation Pressure Gauge A digital Vacuum/Pressure Gauge is included with alarm function Pressure Limits for gauge: -100 Kp  to 0  and to 30MPa (Vacuum to Atmosphere to Positive Gas Pressure) Installation: Water Cooling There are four water-cooling bracket blocks, two on each side. Two water cooling ports on each block. Illustration of linking all four half-water cooling blocks in series. Option Water Cilller Must have a water chiller while heating this tube, or it will cause damage to the flanges. A water chiller is required, but not included, please click to order at extra cost. Recommended Optional Tool Please use a torque wrench to make sure the equal forces to be applied to the bolts when installing the CF flange in MTI high-pressure furnace. Hex Bit Socket M14 of Torque wrench for CF flange installation CFTQ-M14

Tube Dimensions
 O.D. 85 mm      I.D. 50mm     Length: 1000mm
Inside Diameter:  50 mm
Tube Length:                    1000 mm
Max.Working Temperature
without Load:   		1100 °C
Working Pressure &
Temperature:
Maximum pressure inside the tube
 Heating temperature
Max. 1958 PSI  (13.5Mpa)    (140 Bar) 800°C
Max. 1189 PSI  (8.2 Mpa)    (80 Bar) 900°C
Max. 595  PSI  (4.1 Mpa)     (40 Bar) 1000°C
Max. 362  PSI  (2.5 Mpa)     (25 Bar) 1100°C (for <1hr)
Warning: 
  • Please set up a pressure alarm point in the digital pressure display before the operation
  • Must install a pressure regulator on the gas cylinder to increase pressure gradually.
  • Service-life design for 2,000 hours at 800oC. The high-pressure vessel is a consumable part, please order replacement once found deformation
Pressure Gauge
  • A digital Vacuum/Pressure Gauge is included with alarm function
  • Pressure Limits for gauge: -100 Kp  to 0  and to 30MPa (Vacuum to Atmosphere to Positive Gas Pressure) 
 Installation:

 

          

 
Water Cooling
  • There are four water-cooling bracket blocks, two on each side.
  • Two water cooling ports on each block.
  • Illustration of linking all four half-water cooling blocks in series.
  •     
Option Water Cilller
  • Must have a water chiller while heating this tube, or it will cause damage to the flanges.
  • A water chiller is required, but not included, please click to order at extra cost.
Recommended
Optional Tool 
,
Maximum pressure inside the tube
 Heating temperature
Max. 1958 PSI  (13.5Mpa)    (140 Bar) 800°C
Max. 1189 PSI  (8.2 Mpa)    (80 Bar) 900°C
Max. 595  PSI  (4.1 Mpa)     (40 Bar) 1000°C
Max. 362  PSI  (2.5 Mpa)     (25 Bar) 1100°C (for <1hr)